Order Code : SZ000274
Manufacturer Part No : A000074
Arduino Ethernet with PoE
The Arduino Ethernet is a microcontroller board based on the ATmega328 . It has 14 digital
input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack,
an ICSP header, and a reset button.
NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be
used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.
An optional Power over Ethernet module can be added to the board as well.
The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver
chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield.
An onboard microSD card reader, which can be used to store files for serving over the network, is
accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card
is on Pin 4.
The 6-pin serial programming header is compatible with the USB Serial adapter and also with the
FTDI USB cables or with Sparkfun and Adafruit FTDI-style basic USB-to-serial breakout boards. It
features support for automatic reset, allowing sketches to be uploaded without pressing the reset
button on the board. When plugged into a USB to Serial adapter, the Arduino Ethernet is powered
from the adapter.
The Revision 3 of the board introduces the standardized 1.0 pinout, that consist in:
added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the
RESET pin, this will the opportunity to shield that use i2c or TWI components to be compatible with
all the Arduino boards;
the IOREF that allow the shields to adapt to the voltage provided from the board. Shields that use
the IOREF pin will be compatible both with the board that use the AVR, which operate with 5V and
with the Arduino Due that operate with 3.3V. Next to the IOREF pin there is a not connected pin,
that is reserved for future purposes.
This order cannot be processed for the below reasons....
Our system structure cannot process two or more items with different lead time
( In stock and lead time items cannot be placed in a single order)
Different lead time order cannot be dispatch partially
If you are processing to place two or more items with different lead time
e.g , item with 2 weeks lead time and the other item In stock , then order cannot be processed you will have to place two separate orders
For example , place the order with In stock separetely
and there will be no limit for you order as log as all the selected items are In stock and the same for the lead time.
If the lead time is matching the no limitation of the number of items.
© 2022 All Rights Reserved to mitscholl.com